New insight to the oxidation kinetics of silicon-containing steel at high temperature

This study investigated the oxidation kinetics of silicon-containing steel at 1150–1300 °C using a Simultaneous Thermal Analyzer under atmospheric conditions similar to that of an industry reheating furnace. There is a critical time point for the oxidation kinetics at an oxygen concentration of 4·0 vol.-%., following which the oxidation rate constant increases with the increasing oxidation temperature. The model coefficient A in the kinetic oxidation equation was found to be constant. However, before the critical time point, the oxidation rate constant remained unchanged; the model coefficient A decreased with the increasing temperature. Therefore, the kinetic model of silicon-containing steel for isothermal oxidation was observed to be a modified one on the basis of the experimental data. In addition, the critical time point was prolonged with the increasing isothermal oxidation temperature. Moreover, the oxidation activation energy of the tested silicon-containing steel was 366·16 kJ mol^?1.     

第七届世界军人运动会核与辐射风险评估与控制

武汉市涉核单位众多,存在一定的核与辐射事故风险。通过对武汉市举办第七届世界军人运动会可能存在的核与辐射风险因素进行识别及评价,确定可能发生的12类核与辐射事故类型及风险水平,进而有针对性的制定风险防控措施,做到辐射应急管理关口前移,在保证军运会期间核技术利用单位正常生产活动的基础上有效的保障了核与辐射安全。     

工程配套小型石料矿山复杂环境开采爆破技术

建设工程配套石料矿山相比传统以取得矿产品为目的的采石场具有周边环境复杂、施工强度高、全寿命周期短、工程质量要求灵活多变、爆破安全警戒工作量大等特点。以普陀区六横岛中远船务二期工程石料（宕渣）矿爆破开采工程为例，介绍了该类矿山开采爆破的设计施工技术要点及施工经验，有效解决了建设工程配套小型石料矿山复杂环境开采爆破存在的一些问题，对于类似工程实践有一定的借鉴价值。     

我国硫化矿石自燃防治关键技术研究现状及发展趋势

为了给我国金属矿山硫化矿石自燃灾害防治技术发展提供决策依据，根据近年来国内外有关硫化矿石自燃行为特征及其防治技术的研究现状，系统阐述了硫化矿石自燃机制、预测预报技术、综合治理技术等重点领域的研究进展；结合当前金属矿山自燃灾害现状和冶金工业发展形势，指出了硫化矿石自燃演化机制、准确探测火源位置、监测与预警技术、防灭火技术与装备和提高防控效能等关键技术问题仍是未来重点研发方向；硫化矿石自燃灾害防治技术的可持续科学发展对于保障金属矿山安全高效开采与促进生态环境保护具有重要意义。     

某船用柴油机排气管路流-固耦合计算与保温效果研究

对某船用柴油机排气管路的流动与传热过程开展流-固耦合仿真分析。结果表明:受排气管路结构影响，管内流动方向和流速发生变化，局部区域产生明显的回流现象；排气管路外表面温度分布差异较大，平均温度高达534 ℃。为达到柴油机安全设计要求，在排气管路外壁敷设保温材料。分析结果表明:气凝胶纳米材料的保温效果优于硅酸铝纤维材料，在相同的运行条件和使用要求下，气凝胶纳米材料的敷设厚度更薄。     

计及储能动态的VSG惯量阻尼自适应控制研究

随着风力发电、光伏发电等新能源发电渗透率增加，电力系统的等效惯量和等效阻尼逐渐减小，其稳定性问题变得越来越严峻。虚拟同步发电机（virtual synchronous generator， VSG）技术的提出能有效地解决这一问题。然而，传统的VSG并网逆变器采用恒惯量和阻尼控制，在系统受到扰动时，其鲁棒性较差。因此，为增强系统的鲁棒性，优化其频率响应曲线，本文提出了一种计及储能装置动态特性的并网VSG惯量阻尼自适应控制策略。首先，阐述了VSG的基本工作原理，然后通过建立其数学模型分析不同旋转惯量和阻尼系数对系统输出特性的影响。在此基础上，结合同步发电机（synchronous generator， SG）功角特性曲线和频率振荡曲线设计出旋转惯量和阻尼系数的自适应控制策略，该控制策略通过引入惯性环节以较好地匹配储能装置的动态特性。最后，通过MATLAB/Simulink仿真软件对比分析了所提控制策略和传统的VSG恒惯量和阻尼控制，结果验证了所提控制策略的正确性。     

基于Android平台利用表格布局制作简易计算器界面

Android程序设计中,有6大布局方法。文章重点论述了基于Android平台利用表格布局来制作一个简易的计算器界面,涉及详细的操作步骤,对计算器界面进行有效美化和优化,并做出总结。     

不同含量低污染水对人工湿地中细菌的影响研究

探究水平流人工湿地(HFCW)系统处理低污染水过程中,相同COD/ρ(TN)下不同碳氮含量对细菌群落结构的影响。结果表明,进水为较高碳氮含量的HFCW(HF1)和进水为较低碳氮含量的HFCW(HF2)对COD和TN的去除效率具有一定的差异,HF1和HF2对COD的去除效率分别为48.26%和28.89%,对TN的去除率分别为79.06%和81.87%。HF1中细菌的丰富度和多样性均高于HF2,HF1中富集的优势细菌为Chloroflexaceae、Comamonadaceae和Rhodocyclaceae,均具有异养反硝化功能,HF2中富集的优势细菌为Xanthomonadaceae和Rhodocyclaceae,其中Xanthomonadaceae具有自养反硝化功能。COD、NH4^+-N和NO3^--N对HF1中细菌群落的影响大于对HF2中细菌群落的影响,HF1中COD对细菌群落的影响大于NH4^+-N和NO3^--N。     

Chemical process fault diagnosis based on enchanted machine‐learning approach

In the chemical industry, fault diagnosis is a challenging task due to the complexity of chemical equipment. This paper proposes a machine learning‐based approach to achieve the goal of fault diagnosis. First, in order to reduce the impact of redundant features, support vector machine recursive feature elimination (SVMRFE) is used to select important features. The trained probabilistic neural network (PNN) is then used for fault diagnosis. Considering that the diagnostic performance is affected by its hidden layer element smoothing factor (σ), the modified bat algorithm (MBA) is used to optimize the PNN to obtain optimal global parameter values. The MBA adopts a better optimization mechanism than the basic algorithm and achieves excellent global convergence. It can globally optimize the smoothing factor, which effectively improves the fault diagnosis ability of the PNN. During the testing of the Tennessee Eastman (TE) process data set, we evaluate the performance of the proposed model by comparing the F₁‐score and accuracy of the different methods. The charts provided describe the fault diagnostic results and classification for the different models. The results indicate that the MBA has a better optimization ability than other traditional optimization algorithms. At the same time, the combination method proposed in this paper is also superior to others and can significantly improve the accuracy of TE process fault diagnosis.     

Modeling and analysis for multilayered complex communication network of satellite navigation system

This study is extended to construct the network model, the node model, and the link model of complex communication network for satellite navigation system (CCN‐SNS) based on the hierarchical architecture. Firstly, a method called snapshots was proposed to describe the dynamic topology for CCN‐SNS; secondly, another method was put forward to model the different nodes of the CCN‐SNS; thirdly, the different links between every two different nodes were modeled. Therefore, based on the OPNET tools, a simulation for the CCN‐SNS, which contains the models that proposed earlier used to analyze the navigation accuracy and network transmission performance, was performed.